Mid-USA 16 X 3.00 Black Complete Rear Wheel Fits All Harley-Davidson 1979-1999

This 16 x 3.00 inch wheel is laced, trued and ready to run! Can be used on 1979-1999 Harley-Davidson Sportsters and Big Twins as well as custom applications with 3/4 inch axles. This is a dual flange wheel. These high-quality wheels feature a Harley-Davidson style drop-center steel rim, chrome spokes and tapered wheel bearings. The tapered, 3/4 inch ID (inside diameter) bearings are the same style as stock H-D for easy future maintenance.

Note: Fitment of this wheel is based on axle diameter (3/4″) and wheel location (Front/Rear), it is not a direct OEM replacement wheel. The hub on this wheel is 6-5/16″ wide measured from the outside of one flange to the outside of the other flange. If your hub is a different width additional modifications to wheel spacing, sprocket/pulley spacing, rotor spacing may be necessary in order to assure proper alignment. We recommend that you loosely mock up this wheel on your bike with the rotor and pulley/sprocket you will be using lightly fastened to flange, and check your sprocket alignment, wheel spacing, rotor/caliper spacing prior to mounting a tire on the wheel. Lowbrow Customs can not accept any returns on wheels once a tire has been mounted on it.

Note: Spoked wheels do require a tube and rim strip.

• Complete 16 x 3.00 inch rear wheel
• Can be used on Harley-Davidson Sportsters and Big Twins 1979-1999 (Except FLH and FLT), plus custom applications
• Chrome hub, rim and spokes
• Tapered bearings for 3/4 inch axle
• This wheel has 7/16″ holes on the sprocket/pulley side of the flange and 3/8″ holes on the brake disc side